Apple Tv Sound Not Working On Projector

We solved that problem by swapping out the sony bd player for a panasonic and it works fine. The surround sound is plugged in (by wires) to the dvd player.

Connecting Epson Projector To Apple Tv - Youtube

However i would refer to apple for other solutions since the speaker does not appear to work with the device.

Apple tv sound not working on projector. There are some older projectors as well that can be easily connected to apple tv, only if they support dvi input. However, it stopped turning the tv on. Select the homepod or stereo pair that you want to use for home theater audio.

The sony bd player got that and decided, since the projector did not handle sound, it would not send audio over the hdmi output to the projector. Not only is it a great speaker, but it also sports a whole host of amazing functions. You can do this by going to settings > system > restart, or by holding the menu and tv button until the light on the front of the apple tv begins blinking rapidly.

I play the projector and it works with apple tv via the hdmi port, however the sound is not coming out of the amp. Thanks for posting on the support community. Firstly you need to get your apple remote.

If you don't hear audio when streaming video from your ios device or mac to your apple tv, make sure that the volume is turned up and not muted on both your ios device and your television or receiver. When i plug in my apple tv to the projector (by way of hdmi), i can see the picture but have no sound. The roku device i have is a 3800x and is connected to a onn projector.

If there is absolutely no sound when you try to play a movie on the app, then you will need to make sure your apple tv’s audio settings aren’t set to dolby. I have done the power disconnect/reset for both the apple and the tv. Go to video and audio.

Choose 'settings' and go to 'audio & video'. Homepod doesn't have any wired inputs, and it won't work as a normal bluetooth speaker without some hacking with a raspberry pi. If it says input around the area for the audio cables then that is where.

Turn off bluetooth or if already off, try turning it on. Roku streaming stick (3800 series) roku streaming players. Use it as a smart speaker, smart home control, and even connect it to your tv!

Open settings on apple tv. Reset your network settings on your idevice in settings > general > reset > reset network settings. You can use an apple homepod mini as a soundbar, but you have to use it with the new apple tv 4k.

Go through the setup process for the homepod mini. In the 'audio mode' option, change the setting from auto to '16 bit'. I have a projector that i am able to play dvd's through (connected to my dvd player).

The movie will play but has no sound. You can change this setting to other available speaker options. It may help to know what model projector you have.

You'd need to hook an apple tv up as the video source for the projector, and then airplay the audio from apple tv to the homepod. Hopefully apple will update this to work with the rear camera for projectors. Kind regards, adam promethean technical support

But, if you want to access sound, you may use the optical audio port and so you will be satisfied after delivering the presentation. Change any of the following: It doesn’t matter if your tv serves as the digital audio extractor by passing.

If your apple tv sound is still not working, odds are that the changing of audio output can give the results. You will most likely be at an angle to the screen. You must not cover the camera.

All of my apps have sound and work except for the apple tv app. If you're streaming video from an iphone or ipad, check the ring/silent switch. 3800x, 3800eu, 3800mx, 3800rw, 3801uk, 3801tt, 3801de, 3801ie.

With iphone, ipad, or ipod touch: Update ios, apple tv, and homepod software. Your apple tv box only provides an hdmi output, however, so there’s no way to avoid using hdmi to transmit audio.

From here you can choose the following: You can tell that you covered the proximity sensor (to the right of the speaker on the iphone 12) because the screen will turn off. Audio output (apple tv 4k):

If you connect one or two homepod speakers to apple tv for home theater surround sound, all audio, including navigation clicks, is routed to the homepod speaker(s). In the home app, press and hold. All good so far, the problem is that it only works with the remote, and i would like to do the same when i say hey siri, turn on the apple tv to my iphone (the appletv turns on, but not the projector).

You should also remember that it will only be capable of video and not audio. However, another sound issue that some apple tv owners have ran into with disney plus is that there is background noise but when the people on tv speak, no sound comes out. I also have a siri shortcut that turns on the appletv, the soundbar,.

My apple tv remote works fine with volume and turning the tv off. The hdmi interface is notoriously prone to jitter artifacts, so there are benefits to bypassing it, especially for music playback. From the home screen on apple tv, select settings > video and audio > audio output.

Here are the steps to execute this: If your home entertainment system doesn't support the audio format that apple tv automatically selects, you can manually change the audio format. Disconnect from any other bluetooth devices (like speakers) connect to the same wifi network.

The problem with the mac mini is that it is not sending sound out through the hdmi cable. As the projector does not have audio pass through, the only suggestion would be to use the bluetooth speaker. Go to settings > video and audio > audio format and turn on change format.

If it's set to silent, you'll see an orange line.

No Sound Through Hdmi With Mac Mini Connected To Projection Tv - Ask Different